Forum Replies Created

Viewing 25 posts - 1 through 25 (of 120 total)
  • Author
    Posts
  • in reply to: CJT Virtual Crowd #14354

    Damian Baker
    Participant

    Hi Thor,

    Thank you for your support question and letting me know about this.
    Please tell me, are you using the self installer, where it creates the Code Blocks automatically or did you create everything manually?
    You may have seen instructions for both ways.

    As for:
    1) In css files the

    generates syntax error. Same for JS config. (I understand <style> </style> in HTML, but css and js?)

    The <style></style> and <script></script> declarations would be needed for the Code Blocks, however if they are used in Code Files or Code Templates then they should not be needed. Code Templates saves and loads them as actual real .css or .js files while Code Files uses a boilerplate snippet that automatically places this in for you. E.g. <style type="text/css">%s</style> whereby %s is your CSS code.

    As for the others points your mentioned, based on further investigation, it may require an update.
    Thank you.

    Kind Regards,
    Damian Baker

  • in reply to: Download the CJT Plus #14163

    Damian Baker
    Participant

    Hi Kelvin,

    I believe you have the older and deprecated CJT CORE and CJT PLUS, is that correct?

    Regards,
    Damian

  • in reply to: How to remove revisions #14028

    Damian Baker
    Participant

    Hi Kat,

    Currently there is no provision to delete Revisions except through the database where they are stored. I can’t tell you off the top of my head, which table sorry. Additionally, there is no way to delete all revisions.
    That said, I think it is a great new feature idea to add a little delete icon or ‘x’ next to each revision to delete the record.
    I do like this and will look into adding this to the features pipeline for the next release.

    Kind Regards,
    Damian Baker

  • in reply to: WordPress update causing code blocks to disappear. #14007

    Damian Baker
    Participant

    Hi there,

    Sorry for the delay in responding.
    I am not sure if you have solved this, but I have seen this issue a number of times before. Please clear your browser cache, then do a hard refresh of the CJT dashboard page. Clearing the browser cache is required especially when you are migrating to a totally different version of CJT as it needs to pull in the latest scripts and stylesheets.

    I hope this helps.

    Regards,
    Damian Baker

  • in reply to: Toolbox PLUS update #13974

    Damian Baker
    Participant

    Hi David,

    It is personal preference to have either ECM PLUS or CJT PLUS.

    The main difference is that ECM uses a totally different user interface that is responsive. We are finding a lot of people are preferring the CJT user interface because it has buttons to perform actions fast, while with ECM, people instead must click the Panels button to get to some of those same actions. The Panels button in ECM keeps things more tidy, organised and responsive – even on mobile devices, although it can take that bit longer to find what you are looking for at first glance. So you may find there is an extra mouse click to get to that action. Lastly, I should mention that CJT is partly responsive. As for the overall build quality and performance, both plugins are equal as they mostly share the same code base.

    I will send you the CJT PLUS plugin zip file shortly.
    Thanks

    Regards,
    Damian Baker

  • in reply to: Toolbox PLUS update #13908

    Damian Baker
    Participant

    Hi David,
    I have resolved this for you and sent you an email.
    Thanks

    Regards,
    Damian Baker

  • in reply to: Toolbox PLUS update #13825

    Damian Baker
    Participant

    Hi David,

    Sure.
    Feel free to send it to:
    support@css-javascript-toolbox.com

    Thanks
    Damian

  • in reply to: Toolbox PLUS update #13822

    Damian Baker
    Participant

    Hi David,

    Thanks for your message.
    That does sound about right. There was another version of CJT PLUS 1.1.2 before it jumped to CJT 8.4

    We wanted to provide a similar versioning structure for Free/Core and PLUS to keep things synchronised and make it less confusing. So as things currently stand, the CJT Free/Core version on WordPress.org is at 8.4.1 and the latest CJT PLUS is at version 8.4
    It is interesting why it is saying that the update is unavailable for this plugin though. Can you send an email with temporary admin credentials so I can check your license section.
    Sorry for the confusion.

    Regards,
    Damian Baker

  • in reply to: How to hide CJT notice on dashboard for non administrator #13268

    Damian Baker
    Participant

    Hi again,
    I think i understand what you are saying. Your site has subscribers and when they login, they will all see this news widget – correct?

    Also, to let you know, I have changed the news post recently so this ‘advert’ should no longer be shown in your dashboard.

    Regards,
    Damian


  • Damian Baker
    Participant

    Hello,
    I have only just returned from vacation so I apologise for the delay with replying.
    No I have not tested this but I am also intrigued to see what happens.

    Thanks

    Regards,
    Damian


  • Damian Baker
    Participant

    Hello,

    Sorry for the delay as I have been on vacation.
    Please send me temporary admin login details so I can take a look and solve this for you.
    Direct this to: support@css-javascript-toolbox.com

    Thanks

    Regards,
    Damian Baker

  • in reply to: How to hide CJT notice on dashboard for non administrator #13251

    Damian Baker
    Participant

    Hello there,

    Are you talking about the CSS & JavaScript Toolbox News widget on the WordPress dashboard. This can be turned off by going into Screen Options at the top right-hand side of the dashboard. Then uncheck CSS & JavaScript Toolbox News.

    Regards,
    Damian Baker

  • in reply to: External Scripts #13233

    Damian Baker
    Participant

    Hi there,

    Thanks for your feedback. I am currently working to redo the entire documentation with videos, write-ups and examples. A lot of what you said makes sense, and I am sure future releases can make this feature a lot more user-friendly and intuitive.
    Also, it is up to the end-user to use this feature responsibly. Scripts cannot be ‘stolen’ if they are freely provided as open source (e.g. with a GPL, MIT or BSD license). Copyrights are kept intact because these scripts often have the script author in the header, which is often stipulated by the license.
    Again, the end-user must adhere to the licensing for scripts hosted on CDNs and make sure there is compliance before using the External Script feature.

    Anyway, I appreciate what you have said and will add some of these ideas to the tasks list for future developments.

    Regards,
    Damian Baker

  • in reply to: Help! Cannot activate license key for CJT Plus #13160

    Damian Baker
    Participant

    Hi Craig,

    Thanks for your support.
    I think I understand the issue and what you are trying to do. If you like, I can take a look into your website and check out what is going on, just email me temporary admin login details.

    Else if you want to try yourself, firstly just to be safe, make a backup of your code blocks via copying your code to a text editor, or if you prefer, just backup your database.

    You would need to deactivate and delete CJT Core from Plugins. This is not used or needed by CJT PLUS that you just purchased. In fact, you should be able to deactivate all your licenses and reset the fields before deactivating and deleting CJT Core. You also should deactivate and delete the previous version of CJT PLUS. Since your code is contained within the database, this should carry across just fine to the new versions.

    Then go into Plugins and do a search for CSS & JavaScript Toolbox or go to WordPress.org and download the free version here: https://en-au.wordpress.org/plugins/css-javascript-toolbox/
    Once you have installed and activated CJT Free from WordPress (link above), you can then upload, install and activate the premium CJT PLUS version you just purchased. Click the Setup link in CJT PLUS (in Plugins) and you should be able to enter your license key you received.

    Let me know how you go.

    Kind Regards,
    Damian Baker

    CSS & JavaScript Toolbox Support
    e: support@css-javascript-toolbox.com
    w: https://css-javascript-toolbox.com

  • in reply to: Place code directly after body tag #13031

    Damian Baker
    Participant

    Hi Johan,

    Sorry about the delay. You are right.
    This website has not been sending me notifications and I only check the forum once in a while. I need to fix this.

    As for your question, which is a great question. I do not believe you have that sort of pin-point control to place it just after the tag in either CSS & JavaScript Toolbox or Easy Code Manager.

    That said, I will pose this question to the senior developer as I am interested to know myself. Maybe this can be a future feature and if it is not hard to do, I can try to fast-track such a development.

    Kind Regards,
    Damian Baker

  • in reply to: Update Plus New Version? #13005

    Damian Baker
    Participant

    Hi Jesse,

    Sorry for the confusion. I did check out that screenshot and you do have the latest version.
    9.0.1 is the latest for CJT Core and 2.0 is the latest for CJT PLUS.

    Now we have been working on an update, which will have:
    – better error management – especially SQL errors
    – performance tweaks
    – a new Code Beautify feature
    – a new Code Minify feature

    I can’t say exactly when this will be ready but I am hoping not too far away.
    Regards,
    Damian Baker

  • in reply to: Update Plus New Version? #13002

    Damian Baker
    Participant

    Hi Mark,

    Sorry for the delay in getting back to you.
    Yes, we do have 1.1.1 available, however I am not sure why you cannot see it.
    Did you enter your license information for automatic updates?
    I will check your license connection tomorrow for you. See what may be going on.

    Regards,
    Damian Baker


  • Damian Baker
    Participant

    Hi Jacob,

    Can you send me temporary admin login details so I can take a look.
    I have your licenses on file so I will be able to add the details straight on your dashboard. I am not sure what version of CJT you are running, so if you are running a legacy version, we can provide the latest for you.

    Regards,
    Damian Baker


  • Damian Baker
    Participant

    Hi achuro,

    Thanks for reporting this issue to us. I will forward this to my senior developer for further analysis.
    Yes, we will be updating the plugin in the near future.

    Much appreciated.
    Regards,
    Damian Baker

  • in reply to: SQL Error found from error.log #12987

    Damian Baker
    Participant

    Hi Kelvin,

    Thanks for your support question. I apologise for the delay.
    We see these errors from time to time and they can be caused by various means. Some due to syntax errors in the code blocks and others via unresolved errors within the plugin itself. This is generally not an issue, as these generated errors (or warnings) do not pose problems. That said, recently we have been dedicating more development on capturing and handling errors better, and also making the installer and uninstaller a lot more robust. Our aims are to make the plugin a lot more robust in general.

    Regards,
    Damian Baker

  • in reply to: Multisite support – show this code-block on all sites #12918

    Damian Baker
    Participant

    Hi Sjur,

    CJT does have limited support on multisite. Meaning it does work on multisite installs, but is limited on control of the Code Blocks on each site within the multisite install. What you said is a great idea to have a Aux setting or even a seperate dashboard for assigning code blocks within a multisite install.

    This would be a great development. Unfortunately the senior developer of the CJT project is no longer with us, so I am currently looking for another. I hope to find one soon.

    Regards,
    Damian

  • in reply to: Not able to acces all my page to put the script on #12915

    Damian Baker
    Participant

    Hi Michelle,

    I sent you an email.
    Thanks

    Regards,
    Damian Baker

  • in reply to: CJT Extension update errorAPI Service Exception error message #12914

    Damian Baker
    Participant

    Hi Simon,

    I apologise for the inconvenience.
    I will send you an email shortly regarding this issue so we can discuss further.

    Regards,
    Damian Baker

  • in reply to: External Scripts #12911

    Damian Baker
    Participant

    Hi Donny,

    I believe you are doing things correctly with using the External Script function and I am glad to know that it shows under your username. The reason the script is not outputting is because a Code Block cannot be empty. Please consider writing a single line of code in the Code Block. For example, a HTML comment such as:

    <!-- Linking jquery-1.7.1.js script -->

    This will force CJT to output the template (i.e. external script) that is linked to your Code Block.

    Regards,
    Damian

  • in reply to: External Scripts #12909

    Damian Baker
    Participant

    Hi Donny,

    Placing third party scripts using the External Script function saves the script in Templates so you can embed or link them. If you were to go into Templates you should see it in there. You should be able to check to see if it is linked to the Code Block in the Templates Panel.

    Hope this helps.

    Regards,
    Damian

Viewing 25 posts - 1 through 25 (of 120 total)